will blammo kill-markers clog up my barrel?
the coating on blammo kill-markers is designed to come off. if there are high spots on a bb they will crush down or rub off rather than wedge into the barrel. we use only the very finest quality bbs in production of blammo kill-markers and if you don't have barrel jamming problems with plain bbs, blammo kill-markers should not create this problem. if you do experience occasional barrel jambing with plain bbs, blammo kill-markers could actually improve the performance of your gun. they are coated with a superfine dry powder lubricant, blammo dry lube, which will greatly reduce loss of velocity due to barrel friction and in most cases should prevent a bb from becoming wedged.
will the marker coating leave residue in my barrel or leave my hands, mags, or gun covered with bright residue?
if you have scratches in your barrel, it is possible that the blammo dry lube will fill that scratch. it isn't a new barrel, but it could improve the ease with which the bb passes the scratch on the way down the barrel. we can't guarantee that a scratched up barrel will improve with the use of blammo kill-markers, but so far, in our experience, blammo kill-markers improve the performance of every airsoft gun and device they are loaded into.
the blammo dry lube can leave a thin film on the inside of your barrel. excess is blown out with use as a dry powder. this should not be noticeable except that in very unusual lighting conditions it might be noticed as a barely visible puff of dust.
the coating doesn't come off on your hands in normal handling. even if the get warm, or damp the coating will remain stable. in fact we've soaked test batches in standing water for a couple of weeks and the coating didn't come off the bbs even during handling. the coating isn't going to smudge up your gun with big bright handprints. your magazine might shave a tiny bit off the surface coating if it has sharp spots, but if your mag has sharp spots in the feed ears, you have deeper issues than whether or not they get a little dust on them. the blammo coating might actually fill in the sharp spot and smooth it over if the imperfection is very small, otherwise the problen should be addressed more directly by a qualified airsmith.
the blammo coating is both heat and humidy stable and you can handle them (even if they get wet) without leaving residue all over your hands.


Portale
Lo staff













ma segnala comunque il colpo a segno. nell'urbano mi sembrano inutili perchè le distanze sono ridotte e quindi è visibile anche da chi spara se effettivamente ha centrato l'avversario,e il contatto del pallino sul corpo è più marcato quindi facile da identificare per dichiararsi.
