Nuova scheda ECU per ctw mx2

[Valentes80]

Ciao ragazzi ho trovato dai nostri amici francesi la seguente scheda: https://www.youtube.com/watch?v=a9Yv...layer_embedded
ADVANCED ECU FOR CELCIUS CTW MX2 (FULL-AUTO & BURST)


Using the CTW trigger as programmator, you can modify :

To change Full Auto/3 Burst Mode in your Manual ECU you have to1. Unload magazine2. release bolt switch3. turn selector switch to Auto from Safe4. press and hold trigger until a flash from LED5. mode changed.To change Day/Night mode of LED you have to1. Unload magazine2. release bolt switch3. turn selector switch to Auto from Semi4. press and hold trigger until a flash from LED5. mode changed.To change setting of Low Battery Indicator you have to- For 11.1V Li-Po batteryOpen jump of V1 and V2- For 9.6V NiMH batteryShort jump of V1 or V2- For other battery or disable indicator : Short both of V1 and V2To understand the meaning of LED- LED keeps on Airsoft is ready to shot, be careful- LED keep flash Battery is low, please recharge- LED keep flash slowly : Battery is empty, power cut off and please recharge

- LED off Magazine is empty or fuse burned

Se qualcuno l'avesse provata fatemi sapere!!!Ciauuuuuuuuu!!!

[Debole1987]

fantastica la voglio

[Valentes80]

Ecco tradotto le caratteristiche della scheda!!!
Utilizzando il grilletto del CTW come Programmatore, è possibile:
Cambiare Full Auto/ 3 Burst
Cambiare Modalità giorno / notte del led
Cambiare o disabilitare l'Indicatore di batteria scarica 11.1V Li-Po O9.6V NiMH
Tropicalizzazione di tutta la scheda!!!
credo che non manchi più niente!!!