Comparativa tra visori notturni - 1° 2° 3° generazione - con foto !
Ho trovato un post interessante sul forum ar15.com e ve lo copio qui:
Questo e' il link:
https://www.ar15.com/lite/topic.html?b=6&f=18&t=329958
Buona lettura :)
--------------------------------------------------------------------------------
Practical Application of Night Vision for Domestic
Law Enforcement & Homeland Security
By
Chip Lasky, TNVC Manager, Marketing & Product Development
And
John Chapman, Director of Training, LMS Defense
The purpose of this informational paper is to provide the reader with the strengths and weaknesses of the most commonly available night vision systems when applied to the US domestic law enforcement and homeland security mission. On August 17 and 18, 2010, Chip Lasky and John Chapman conducted a series of tests with the mandate to gather realistic data in order to 1) determine the effectiveness of commonly available nightvision when utilized in real world circumstances; and 2) utilize this data to determine a minimum level of capability appropriate for domestic law enforcement and homeland security missions. The reason for this undertaking is to provide the law enforcement professional a basis for understanding the capabilities and limitations of various image intensifiers on the market. This informational paper is intended to dispel the confusion surrounding the appropriateness of various devices and their associated image intensifier tubes. This article is not meant to address the technical merits or deficiencies in these devices so much as to provide a realistic portrayal of their capabilities in side-by-side comparison.
To accomplish these goals, we developed a realistic set of scenarios based on real world circumstances likely to be encountered by the user community. We then utilized the five most common night vision devices covering the three most common image intensifier generations available to the domestic user community to observe these scenarios from the responder’s perspective. Each device was tested in each scenario to gather data in three modes: 1) Passive observation using only the available environment’s ambient light; 2) passive observation using each unit’s internal infrared (IR) Illuminator; and 3) Passive observation using a secondary IR Illuminator (Surefire M1 IR Illuminator). A professional photographer then captured photos through each device in each mode, using the same shutter speed and other camera settings. These camera settings were determined by setting up the camera in the mode and shutter speed most favorable to the device with the tube that gathered the least amount of light (the ATN Viper Gen1+).
The need to rapidly and accurately identify threats such as a weapon in a suspect’s hand is overwhelmingly obvious for those going into harm’s way. This was a requisite in developing the scenarios for this article. The idea is to best describe, through photo documentation, the ability to detect and identify threats in accordance with domestic laws of Use of Force. We chose several different locales in which law enforcement personnel are likely to encounter a suspect while using night vision.
Photo documentation was collected with a Nikon D700 Digital SLR Camera. Images are shown as-is with no alteration or retouching. Raw data files are available for peer review.
The five devices tested were:
https://i53.photobucket.com/albums/g...NEPVS14_af.jpg
1.ITT PVS-14 Night Enforcer Gen3 PINNACLE Auto-Gated Image Intensifier (ITTE-NEPVS-14-17)
•Gen3 U.S. ITT PINNACLE
•Resolution: 64-72 lp/mm Typical
•Thin-Film
•Auto-Gated
•Adjustable/ Variable Gain
•1x +0.03 Magnification
•40º + 2º Field of View (FOV)
•F/1.2 Objective Lens
•EFL 26mm Ocular Lens
•Diopter +4 to -6
•10″ to Infinity Focus
https://i53.photobucket.com/albums/g...PVS14L3_af.jpg
2.Litton (L3) PVS-14 Gen3 Auto-Gated Image Intensifier
•Gen3 U.S. Litton Auto-Gated
•Resolution: 64 lp/mm Typical
•Thin-Film
•Auto-Gated
•Adjustable/ Variable Gain
•1x Magnification
•40º Field of View (FOV)
•F/1.2 Objective Lens
•EFL 26mm Ocular Lens
•Diopter +2 to -6
•10″ to Infinity Focus
https://i53.photobucket.com/albums/g...4_G2SHP_af.jpg
3.GT-14 Gen2 Super High Performance (SHP) Image Intensifier
•Gen2 Super High Performance (SHP)
•Resolution: 51-64 lp/mm Typical
•Non-Filmed
•Non-Gated
•Automatic Brightness Control
•1x Magnification
•40º Field of View (FOV)
•F/1.2 Objective Lens
•EFL 23mm Ocular Lens
•Diopter +5 to -4
•10″ to Infinity Focus
https://i53.photobucket.com/albums/g...n/D300_af1.jpg
4.D-300 Gen2 MILSPEC Image Intensifier
•Gen2+
•Resolution: 28-38 lp/mm Typical
•Non-Filmed
•Non-Gated
•Automatic Brightness Control
•1x Magnification
•40º Field of View (FOV)
•F/1.2 Objective Lens
•EFL 25mm Ocular Lens
•Diopter +2 to -4
•10″ to Infinity Focus
https://i53.photobucket.com/albums/g...n/VIPER_af.jpg
5.ATN Viper Gen1 Image Intensifier (NVG0VIPR10)
•Gen1+
•Resolution: 40 lp/mm Typical
•Non-Film
•Non-Gated
•Automatic Brightness Control
•1x Magnification
•20º Field of View (FOV)
•F/1.4 Objective Lens
•EFL 35mm Ocular Lens
•Diopter +5 to -5
•1 m to Infinity Focus
These devices were selected because they can display the various generations and levels within generations of image intensifier technology. The units are all monocular-type and can be hand-held or head-mounted for a hands free capability. Emphasis was placed on individually-operated devices used in a “search and observe” capacity.
Test Scenario 1 – Residential Home Basement (Subject at 11 yards)
This scenario was designed to simulate the stealth search of a normal residential home, but can be expounded to include commercial and industrial basements and internal rooms. The point of this exercise is to convey the limitations of image intensifier technology. Even the most advanced Gen3 PINNACLE tube requires ambient light. The amount of ambient light is directly proportional to the performance of the device. Basements and other complete no-light environments are often encountered by professionals going into harm’s way. These situations require a more advanced and sensitive image intensifier to aptly resolve details in the image. Even the most powerful device will struggle to gather enough light in a completely dark environment. As with most residential basements, no light source was present when the power to the light fixtures was off. This series of images was displays only the image intensifier by itself and with the aid of a Surefire M1 IR illuminator.
ITT PVS-14 Night Enforcer Gen3 PINNACLE Auto-Gated Image Intensifier
Without any ambient light or artificial IR light, the PVS-14 Gen3 PINNACLE Auto-Gated image intensifier does not produce any sort of useable image.
https://i53.photobucket.com/albums/g...S14pin_1_1.jpg
The Gen3 PINNACLE Auto-Gated Image Intensifier is able to gather enough light to provide the user an image when the internal IR illuminator is activated. Because there is no practical ambient light, the image is very dark and loss in resolution hampers the ability to discern detail, even at short distance, but the unit is useable in this condition. Light-colored objects such as the metallic weight bench, step stool, wood joists/wall studs, and the subject’s shirt help to produce some contrast in the image. The subject’s hands can be seen raised around the chest, as if something is being held, but it is difficult to identify a weapon
https://i53.photobucket.com/albums/g...S14pin_1_2.jpg
The use of the Surefire M1 Illuminator heavily boosts the performance of the Gen3 PINNACLE Auto-Gated tube. Detail can be easily observed. A handgun is clearly visible in the subject’s hands and facial features are seen enough to actually recognize the person. It is clear the subject is standing in front of a cinder block wall and has an escape route from the room to his left. Furniture and appliances can be made out, including a weight bench, television, area fan.
https://i53.photobucket.com/albums/g...S14pin_1_3.jpg
Litton PVS 14 Gen3 Auto-Gated Image Intensifier
Without any ambient light or artificial IR light, the PVS-14 Gen3 Litton Auto-Gated image intensifier does not produce any sort of useable image.
https://i53.photobucket.com/albums/g...VS14ag_1_1.jpg
The Litton Gen3 Auto-Gated unit displays a similar image to the upgraded PINNACLE tube when the internal IR illuminator is activated. The subject is visible, but details are unresolved. It cannot be determined if a weapon is present and positive identification of the subject’s facial features cannot be made. Smaller details of the surroundings can be made out for better situational awareness.
https://i53.photobucket.com/albums/g...VS14ag_1_2.jpg
Adding in the Surefire M1 creates a big difference. The subject can clearly be seen, recognized, and a weapon identified. Feature of the room are now clear such as the cinder block wall and opening into a separate room to the subject’s left.
https://i53.photobucket.com/albums/g...VS14ag_1_3.jpg
GT14 Gen2SHP Image Intensifier
The Gen2 SHP image intensifier is ineffective in total darkness without the use of an IR light source. No details of the subject or surroundings are visible.
https://i53.photobucket.com/albums/g...n/GT14_1_1.jpg
Activating the internal IR Illuminator does not add anything to the image.
https://i53.photobucket.com/albums/g...n/GT14_1_2.jpg
The Addition of the Surefire M1 greatly helps the image quality and resolution. The subject can be clearly seen along with the weapon in his hand. In comparison to the Gen3 devices, this image lacks some fine detail. Edges and contrast are not as crisp. Facial features are visible, but not as clear. Contrast created by the way his shirt hangs is not as crisp, making it somewhat more difficult to identify if he is concealing anything beneath clothing.
https://i53.photobucket.com/albums/g...n/GT14_1_3.jpg
D300 Gen2+ MILSPEC Image Intensifier
With no ambient light available, the D-300 Gen2 MILSPEC tube produces no image.
https://i53.photobucket.com/albums/g...n/D300_1_1.jpg
Turning on the internal IR illuminator produces an image, but it is very faint. The subject can be seen, but details are very vague. Little contrast is produced. The subject appears to be holding something in his hands, but positive ID cannot be made.
https://i53.photobucket.com/albums/g...n/D300_1_2.jpg
The external IR illuminator drastically upgrades the image. However, it is nowhere close to Gen2 SHP, let alone the Gen3 devices, under the same conditions. Details are very fuzzy and the subject cannot be properly identified. It is a little easier to see the weapon in his hands, but the lack of resolution hampers positive ID. Note the sharp drop-off of any image outside the IR spot light. The lower sensitivity of the Gen2 MILSPEC tube can only resolve details within the IR light. Situational awareness is severely hampered.
https://i53.photobucket.com/albums/g...n/D300_1_3.jpg
ATN Viper Gen1+ Image Intensifier
The Gen1+ image intensifier produces no image on its own, under pitch black conditions.
https://i53.photobucket.com/albums/g.../Viper_1_1.jpg
Even with the built-in IR illuminator activated, the Gen1+ tube still cannot produce an image under pitch black conditions.
https://i53.photobucket.com/albums/g.../Viper_1_2.jpg
Surprisingly, the Gen1+ tube will not provide any image even when the Surefire M1 is activated under these conditions. Although the external illuminator is powerful, the relatively weak light-gathering capabilities of the Gen1+ tube cannot bring in enough light to provide any form of usable image.
https://i53.photobucket.com/albums/g.../Viper_1_3.jpg
Thoughts-
As evidenced by the photos, pitch black environments really show the limitations of image intensifiers. Because image intensifier technology relies on the presence of ambient light, even the most advanced unit will not produce an image without the aid of an IR illuminator. Clearly, the latest Gen3 devices’ more sensitive tubes have a distinct advantage over the older technology in terms of image resolution and clarity. An IR light source is required for operating in these conditions and allows the Gen3 devices to produce clear images capable of identifying a subject’s face, the presence of a weapon, and environmental details for better situational awareness. The Gen1+ tube proved absolutely worthless in this evolution.
Test Scenario 2 - Open Area Search / Close Range (25 Yards)
This scenario was designed to simulate the search of an open area for a subject. The environmental lighting was common to a city park close to the street at night. Conditions were somewhat clear with minimal cloud cover and less than a quarter moon visible. The purpose of this evolution was to best illustrate acquisition ranges of an armed subject in a rural environment through various levels of night vision gear. In contrast to the previous location, this field will display performance when natural ambient light is introduced.
ITT PVS-14 Night Enforcer Gen3 PINNACLE Auto-Gated Image Intensifier
The Gen3 PINNACLE Auto-Gated tube in the PVS-14 Night Enforcer clearly shows the suspect at 25 yards. His arms can be identified as holding an object (appearing like a pistol) in front of his chest, though positive identification of a weapon cannot be made. The subject can be identified as wearing long pants and a jacket. The light gathering ability of the device produces good contrast, even without the aid of IR illumination.
https://i53.photobucket.com/albums/g...S14pin_2_1.jpg
Built-in IR illuminators are generally low power and meant for searching when there is little to no ambient light available. Because of this, the internal IR illuminator of the PVS-14 Night Enforcer has no practical effect on this scenario where decent ambient light is present.
https://i53.photobucket.com/albums/g...S14pin_2_2.jpg
The external Surefire M1 provides enough power to be useful in open space search and observe scenarios. It provides a significant amount of IR reflection on the subject, causing him to greatly contrast with the environment due to the IR reflection. While there is little more detail seen here compared to the image without IR illumination, the subject is much more visible against the far tree line where there is less light. The entire image area appears brighter.
https://i53.photobucket.com/albums/g...S14pin_2_3.jpg
Litton PVS 14 Gen3 Auto-Gated Image Intensifier
Without any ambient light or artificial IR light, the PVS-14 Gen3 Litton Auto-Gated image intensifier produces a clean, crisp image of the suspect at 25 yards. Clothing is identifiable as well as the possible presence of a weapon. Decent resolution and contrast is seen all the way back to the tree line.
https://i53.photobucket.com/albums/g...VS14ag_2_1.jpg
Activating the internal IR illuminator of the Litton Gen3 Auto-Gated unit produces a faint lightening effect of the image. Slightly more contrast can be observed in the subject’s clothing and grass around his feet. But, like the PINNACLE unit, the Gen3 Auto-Gated tube is sensitive enough on its own, that the addition of the IR illuminator amid decent ambient light does little to enhance the image.
https://i53.photobucket.com/albums/g...VS14ag_2_2.jpg
A clear difference is observed when the Surefire Mi Illuminator is used in-conjunction with the Gen3 Auto-Gated device. The subject is heavily lit-up with ample contrast against the darker, far away tree line.
https://i53.photobucket.com/albums/g...VS14ag_2_3.jpg
GT14 Gen2SHP Image Intensifier
The Gen2 SHP image intensifier produces a decent image that gives the user a view of the subject, but there is no way to identify the presence of a weapon. The far tree line is visible, but like the subject, details are not as crisp as the Gen3 tubes.
https://i53.photobucket.com/albums/g...n/GT14_2_1.jpg
Activating the internal IR Illuminator does not do much for the image in this environment.
https://i53.photobucket.com/albums/g...n/GT14_2_2.jpg
The Addition of the Surefire M1 highlights the subject against the background, but does not help with identifying the weapon. In this case, the illuminator is more useful in picking up the subject.
https://i53.photobucket.com/albums/g...n/GT14_2_3.jpg
D300 Gen2+ MILSPEC Image Intensifier
With no ambient light available, the Gen2 SHP tube still produces a useable image at 25 yards. The resolution is noticeably less than the Gen3 units, but the subject can be easily acquired in the image. Though, when comparing the image to Gen3 units, the Gen2 SHP is obviously darker because of the lesser amount of light able to be gathered. Edge-to-edge clarity is also observed in that the outer zone of the image is noticeably fuzzier and less defined than the Gen3 units. The contrast is also significantly reduced with less definition in the subject and the far tree line. The subject can be seen standing. It is difficult to tell hand placement. The dark swatch in front of the subject’s chest could be a camera or other dark object; or it could be a weapon. The lack of definition/contrast would hamper an officer’s ability to identify a possible threat from this distance.
https://i53.photobucket.com/albums/g...n/D300_2_1.jpg
Turning on the internal IR illuminator adds no noticeable benefit to the image.
https://i53.photobucket.com/albums/g...n/D300_2_2.jpg
The external IR illuminator helps to “ping” the subject, drastically contrasting him against the background environment. At the same time, it can be seen that the surrounding environment is perceived darker because the image intensifier is working to resolve the illuminated portion of the image. The subject washes out.
https://i53.photobucket.com/albums/g...n/D300_2_3.jpg
ATN Viper Gen1+ Image Intensifier
The Gen1 tube fails completely to deliver any image whatsoever. Even under good ambient light conditions, the subject at 25 yards is completely shrouded in darkness. This would leave a law enforcement professional blind of all intents and purposes, even at close distance.
https://i53.photobucket.com/albums/g.../Viper_2_1.jpg
The built-in IR illuminator did not add any value to the image. It is still completely dark with no details discernable.
https://i53.photobucket.com/albums/g.../Viper_2_2.jpg
Not even the additional illumination from the Surefire M1 can provide enough light for the Gen1 tube.
https://i53.photobucket.com/albums/g.../Viper_2_3.jpg
Test Scenario 3 – Open Area Search / Long Range (50 Meters)
This is the same scenario and location as the previous except the subject has moved back 50 yards from the image intensifier.
ITT PVS-14 Night Enforcer Gen3 PINNACLE Auto-Gated Image Intensifier
The Gen3 PINNACLE Auto-Gated tube easily gathers enough light to quickly acquire the subject at 50 yards. High contrast allows details to be resolved such as the suspects bent elbows which raise his hands in front of his chest. However, at this distance, a weapon in hand is not identifiable. The subject can be seen wearing long pants and a jacket, but facial features cannot be seen. A relatively good view of the tree line can be observed. Bushes and trees are easily identified and a good understanding of the surrounding environment is achieved, greatly improving situational awareness.
https://i53.photobucket.com/albums/g...S14pin_3_1.jpg
At this distance, the built-in IR illuminator does not add anything to the image quality. Neither the subject nor the surroundings are affected.
https://i53.photobucket.com/albums/g...S14pin_3_2.jpg
The Addition of the Surefire M1 clearly lights up the subject, causing him to have an almost glowing effect against the surrounding environment. While details become slightly washed out due to the reflection of the IR light, the subject is able to be rapidly acquired at this distance.
https://i53.photobucket.com/albums/g...S14pin_3_3.jpg
Litton PVS 14 Gen3 Auto-Gated Image Intensifier
Like the ITT unit, the Litton Gen3 Auto-Gated tube performs well on its own, easily acquiring the subject at 50 yards. The image is slightly darker overall compared to the PINNACLE unit, but enough detail is available to resolve that a single figure is standing in the open with a tree line in the background. Enough contrast is present to decipher the subject’s hands in front of his chest, though the presence of a weapon is uncertain.
https://i53.photobucket.com/albums/g...VS14ag_3_1.jpg
The built-in IR illuminator is not able to provide useful information to the image. The tree line and subject display slightly more contrast.
https://i53.photobucket.com/albums/g...VS14ag_3_2.jpg
Like the PINNACLE unit, the Litton Gen3 Auto-Gated tube is helped by the introduction of an external IR light source. While the subject is displayed much brighter against the background, the surrounding area is darkened because of the unit’s focus on the lighter subject. A darker object is more noticeable in the subject’s hands, but it cannot be identified at this distance.
https://i53.photobucket.com/albums/g...VS14ag_3_3.jpg
GT14 Gen2SHP Image Intensifier
At 50 yards, the 1x Gen2 SHP tube begins to show some signs of struggle when resolving details. The subject appears much fuzzier than in the Gen3 devices. However, the subject can still be acquired and is visible against the tree line. The lesser contrast of the Gen2 SHP tube will require the user to concentrate on the scan a little harder because it might be easier to lose the subject during rapid scanning. The lack of contrast also affects the ability to identify the subject’s posture. While he is clearly standing in the open, his arms, and more importantly: hands cannot be identified. He could have his arms folded, hands in pockets, or holding something in front of his torso.
https://i53.photobucket.com/albums/g...n/GT14_3_1.jpg
At this distance, the built-in IR illuminator does not add anything to the image quality. Neither the subject nor the surroundings are affected.
https://i53.photobucket.com/albums/g...n/GT14_3_2.jpg
The Addition of the Surefire M1 clearly lights up the subject, causing him to have an almost glowing effect against the surrounding environment. However, it also highlights the lack of contrast and detail able to be resolved with the Gen2 SHP tube. The subjects are no more identifiable, nor are his hands. It is impossible to determine if he has a weapon. The lack of contrast in the image allows more of the light to visible around the environment. The subject does not contrast as much as in the Gen3 units, so image appears to slightly flatten.
https://i53.photobucket.com/albums/g...n/GT14_3_3.jpg
D300 Gen2+ MILSPEC Image Intensifier
The Gen2+ MILSPEC tube is at its limit in this scenario. On its own, the image intensifier can barely resolve the subject. Even then, a closer study is needed to determine that it is, indeed, the subject. Since no other details are visible on the ground, the user could assume that the subject is in a field, but situational awareness is severely hampered because other objects, such as the tree line cannot be seen. The image is very dark due to the limited amount of light gathered by the tube.
https://i53.photobucket.com/albums/g...n/D300_3_1.jpg
The built-in IR illuminator adds a slight amount of light to the image, but not enough to provide any usable information to the user.
https://i53.photobucket.com/albums/g...n/D300_3_2.jpg
Only after the addition of the Surefire M1 can the subject be acquired. While the image is still quite dark, the subject contrasts with the black background. However, there is little detail seen and the subject’s actions cannot be identified. His outline is fuzzy and the most information available is that he is standing. It is impossible to identify the presence of a weapon and situational awareness is further hampered by the lack of detail in the environment.
https://i53.photobucket.com/albums/g...n/D300_3_3.jpg
ATN Viper Gen1+ Image Intensifier
The Gen1 tube fails completely to deliver any image whatsoever. Even under good ambient light conditions, the subject at 50 yards is completely shrouded in darkness. This would leave a law enforcement professional blind of all intents and purposes, even at close distance.
https://i53.photobucket.com/albums/g.../Viper_3_1.jpg
The built-in IR illuminator did not add any value to the image. It is still completely dark with no details discernable.
https://i53.photobucket.com/albums/g.../Viper_3_2.jpg
Not even the additional illumination from the Surefire M1 can provide enough light for the Gen1 tube.
https://i53.photobucket.com/albums/g.../Viper_3_3.jpg
Test Scenario 4 – Open Area Search / Long Range (100 yards)
This is the same scenario and location as the previous except the subject has moved back 100 yards from the image intensifier.
ITT PVS-14 Night Enforcer Gen3 PINNACLE Auto-Gated Image Intensifier
The Gen3 PINNACLE Auto-Gated tube produces an image of the subject at 100 yards, though details of his posture are unidentifiable. Note the subject is partially camouflaged by the shadows of the surrounding foliage. A quick glance might not discover his presence. A humanoid figure can be seen, however the placement of his hands and the presence of a weapon cannot be determined. The tube provides good resolution with the ability to maintain situational awareness of the surrounding area.
https://i53.photobucket.com/albums/g...S14pin_4_1.jpg
At this distance, the built-in IR illuminator’s performance is limited. Because there is not a main subject to focus on, the illuminator provides a somewhat flat view of the scene. It “fills-in” some of the shadowed areas, making them appear a bit brighter. This aids in viewing the subject because the surrounding foliage shadows are evened out. The subject’s hands, still are not visible, neither is the presence of a weapon. Note how the use of the built-in illuminator creates a fuzzier-appearing image because it flattens the shadows.
https://i53.photobucket.com/albums/g...S14pin_4_2.jpg
Using the Surefire M1 creates a definite advantage in this search at this distance. The more powerful illuminator helps locate the subject by making him appear much lighter against the foliage background. Detail is better resolved with the subject’s arms visibly bent at the elbow. This shows the user that the subject is holding something in his hands.
https://i53.photobucket.com/albums/g...S14pin_4_3.jpg
Litton PVS 14 Gen3 Auto-Gated Image Intensifier
The Litton Gen3 Auto-Gated tube creates shows a limitation in this scene because it is does not produce as bright an image as the PINNACLE unit. The heavy foliage creates a lot of shadow which heavily obscures the subject, making him almost impossible to see. In this situation, an additional IR light source is required.
https://i53.photobucket.com/albums/g...VS14ag_4_1.jpg
The addition of the built-in IR illuminator does little at this distance. Again, the light gathering limitations of the Gen3 Auto-Gated tube hamper the ability to resolve the subject against the foliage. However, the illuminator does provide a slightly brighter image and the subject does stand out a bit more against the tree line. The definition of his right shoulder, arm, and leg can be seen. However, the details of his posture are unidentifiable.
https://i53.photobucket.com/albums/g...VS14ag_4_2.jpg
Using the Surefire M1 creates a definite advantage with this image intensifier. The image seems to flatten a bit because shadows are lightened. The subject can be clearly seen at this distance, though the details of his posture are not resolved. He is standing, but the user cannot see the positioning of his hands. Of particular note, however, is the ability to maintain situational awareness with the Gen3 tube’s light-gathering abilities. The surrounding area is still visible and secondary subjects or threats could be identified if present.
https://i53.photobucket.com/albums/g...VS14ag_4_3.jpg
GT14 Gen2SHP Image Intensifier
The Gen2 SHP tube produces a full image at this distance. The far tree line is visible, though the subject is partially obscured by the shadows, making it more difficult to detect his presence. It is impossible to determine whether or not a weapon is present. The fine detail seen in the Gen3 tubes is lesser in the Gen2 SHP unit. While it still performs admirably, the overall image is darker and details are grainier.
https://i53.photobucket.com/albums/g...n/GT14_4_1.jpg
The addition of the built-in IR illuminator does little to aid the image at this distance. A slight brightening is detected, but the tube is fighting for light and requires additional illumination.
https://i53.photobucket.com/albums/g...n/GT14_4_2.jpg
The subject can now be seen against the tree line with the introduction of the Surefire M1. Though resolution is fuzzy, it is possible to detect a man-sized subject at this distance. Details cannot be made out at this distance with this tube, so it is impossible to determine if the subject has a weapon.
https://i53.photobucket.com/albums/g...n/GT14_4_3.jpg
D300 Gen2+ MILSPEC Image Intensifier
The Gen2+ MILSPEC tube has reached its limitation at this distance. There is no way to identify the subject at 100 yards. The foreground grass is visible.
https://i53.photobucket.com/albums/g...n/D300_4_1.jpg
The addition of the built-in IR illuminator does little more than slightly brighten the appearance of the grass. The subject at 100 yards is still not visible.
https://i53.photobucket.com/albums/g...n/D300_4_2.jpg
Using the Surefire M1 adds the slightest bit of help. But, the tube is clearly at its performance limits. The subject can just barely be made-out, but it is impossible to identify him as the subject rather than part of the environment.
https://i53.photobucket.com/albums/g...n/D300_4_3.jpg
ATN Viper Gen1+ Image Intensifier
The Gen1 tube fails completely to deliver any image whatsoever. Even under good ambient light conditions, the subject at 100 yards is completely shrouded in darkness. This would leave a law enforcement professional blind of all intents and purposes, even at close distance.
https://i53.photobucket.com/albums/g.../Viper_4_1.jpg
The built-in IR illuminator did not add any value to the image. It is still completely dark with no details discernable.
https://i53.photobucket.com/albums/g.../Viper_4_2.jpg
Not even the additional illumination from the Surefire M1 can provide enough light for the Gen1 tube.
https://i53.photobucket.com/albums/g.../Viper_4_3.jpg
Thoughts-
This scenario provides a good indication of image intensifier performance capabilities. One of the biggest concerns professionals have when using night vision equipment is the distance at which they can detect, acquire, and identify a threat. This evolution clearly displays these abilities and limitations. Conditions were not perfect due to partial cloud-cover, which helped to show what these image intensifiers can do in real-world scenarios. It is quite evident that the older generation tubes provide less performance. In a law enforcement situation, this can mean the difference between life and death. The lower light-gathering abilities of the Gen2+ MILSPEC and Gen1+ tubes would be too dangerous for serious field work because they offer almost no advantage to the officer. Situational awareness is gone. The Gen3 units performed admirably with the ability to acquire the subject while still maintaining situational awareness. Details are easily resolved and detection capability is good out to 100 yards, even with the tricky foliage background. This evolution also underlines the importance of a separate, high power IR illuminator.
Test Scenario 5 – Warehouse Search / Close Range (10 Yards)
This scenario was designed to test the devices in a CQB environment in an open floor plan warehouse, as is common in an industrial building search. Environmental lighting was minimal, as would be the case during non-business hours, and is present from the open loading dock lights in the back.
ITT PVS-14 Night Enforcer Gen3 PINNACLE Auto-Gated Image Intensifier
The subject is very clearly seen with facial features identifiable as well as the presence of a weapon. Surrounding details of the environment are visible. The high performance of the PINNACLE tube creates great contrast and allows for extremely high resolution.
https://i53.photobucket.com/albums/g...S14pin_5_1.jpg
The built-in IR illuminator does not offer much assistance in this scenario. The image is slightly brighter, but sufficient ambient light is already present.
https://i53.photobucket.com/albums/g...S14pin_5_2.jpg
The addition of the Surefire M1 helps to better illuminate the scene. While it is necessary for this scenario, it can be seen how the storage bins are not visible on the left side of the image. The focus of the illuminator is reflected off the subject’s light-colored shirt, eliminating shadows on his body. This helps to back-light the weapon, making it more quickly identifiable.
https://i53.photobucket.com/albums/g...S14pin_5_3.jpg
Litton PVS 14 Gen3 Auto-Gated Image Intensifier
The Gen3 Auto-Gated tube performs well, quickly acquiring the subject and detecting the weapon. Compared to the Gen3 PINNACLE tube, the Litton Auto-Gated unit appears slightly darker. This is more readily seen in the surrounding environment. Note the boxes stacked on the shelves appear to be slightly less resolved. Facial features are still identifiable
https://i53.photobucket.com/albums/g...VS14ag_5_1.jpg
The built-in IR illuminator did not add any value to the image.
https://i53.photobucket.com/albums/g...VS14ag_5_2.jpg
The scene is better illuminated with the Surefire M1, allowing the storage bins to be better seen. Shadows on the subject’s shirt are gone, allowing the weapon to be back-lit and more quickly identified.
https://i53.photobucket.com/albums/g...VS14ag_5_3.jpg
GT14 Gen2SHP Image Intensifier
The Gen2 SHP tube provides a good image with good resolution under these conditions. The subject is clearly identified through facial features and the presence of a weapon is certain. The surrounding environment is well resolved.
https://i53.photobucket.com/albums/g...n/GT14_5_1.jpg
The built-in IR illuminator did not add any value to the image.
https://i53.photobucket.com/albums/g...n/GT14_5_2.jpg
While the image is definitely brighter with the addition of the Surefire M1, it is also noticeably flatter in appearance. This is especially seen in the subject. The Gen2 SHP tube struggles to resolve some detail after the infusion of light. The weapon is still visible, though it is somewhat more blurry.
https://i53.photobucket.com/albums/g...n/GT14_5_3.jpg
D300 Gen2+ MILSPEC Image Intensifier
The Gen2+ MILSPEC tube produces a significantly darker image than even the Gen2 SHP. The subject is visible and facial features can be recognized. However, the under-powered tube struggles to provide additional data. For a professional conducting a search, this begins to border on dangerous because the surrounding environment is not nearly light enough to detect additional threats.
https://i53.photobucket.com/albums/g...n/D300_5_1.jpg
The built-in IR illuminator does little to the image. IR reflection is seen in the subject’s eyes, but no practical benefit is achieved.
https://i53.photobucket.com/albums/g...n/D300_5_2.jpg
An external, higher-power IR illuminator is almost mandatory in this scenario with the Gen2+ MILSPEC tube. The subject is more clearly defined and the presence of the weapon is quite visible. The added light “pops” the subject from the surrounding environment. Resolution of the surrounding environment drops off quickly and it is still dark, making the detection of additional threats difficult.
https://i53.photobucket.com/albums/g...n/D300_5_3.jpg
ATN Viper Gen1+ Image Intensifier
The Gen1 tube is helped by the light from the loading dock, but provides a very dark image in the foreground. The subject is visible, though quick detection is hampered by the performance of the tube. The weapon is visible, but closer study of the image is required to see it. Facial features are unidentifiable and a quick glance might not detect the subject at all. In a fast-paced situation, the performance of Gen1 obviously creates too much room for hesitation.
https://i53.photobucket.com/albums/g.../Viper_5_1.jpg
The built-in IR illuminator helps the performance of the Gen1+ tube in this scenario. The subject can be more clearly seen as well as the presence of the weapon. The image is still very dark and details are not readily resolved.
https://i53.photobucket.com/albums/g.../Viper_5_2.jpg
Adding a more powerful external IR illuminator definitely helps the Gen1+ unit. The subject is more clearly seen, as well as the presence of a weapon. Facial features are unrecognizable. The surrounding environment is a bit lighter and easier to understand, though the presence of additional threats would still be hard to determine.
https://i53.photobucket.com/albums/g.../Viper_5_3.jpg
Test Scenario 6 – Warehouse Search / Medium Range (20 Meters)
This scenario was designed to test the devices in a CQB environment in an open floor plan warehouse, as is common in an industrial building search. Environmental lighting was minimal, as would be the case during non-business hours. The subject is shown close to a storage rack as if trying to achieve some concealment.
ITT PVS-14 Night Enforcer Gen3 PINNACLE Auto-Gated Image Intensifier
The Gen3 PINNACLE Auto-Gated tube readily acquires the subject and provides a good view of the surrounding environment. Details are resolved and the presence of a weapon is identified.
https://i53.photobucket.com/albums/g...S14pin_6_1.jpg
The built-in IR illuminator did not add any value to the image. The back-lit warehouse overpowers the illuminator.
https://i53.photobucket.com/albums/g...S14pin_6_2.jpg
The Surefire M1 provides a boost to the foreground lighting. The shelves are more lit up, but more importantly, the subject’s weapon really stands out against his body. Facial features are also recognizable because of the forward light source.
https://i53.photobucket.com/albums/g...S14pin_6_3.jpg
Litton PVS 14 Gen3 Auto-Gated Image Intensifier
The Gen3 Auto-Gated unit is a bit darker than the PINNACLE tube. While detail is still resolved, the subject appears darker. The weapon is visible.
https://i53.photobucket.com/albums/g...VS14ag_6_1.jpg
The built-in IR illuminator brightens the image, giving the user a better view of the subject and weapon.
https://i53.photobucket.com/albums/g...VS14ag_6_2.jpg
More detail is visible in the environment with the addition of the Surefire M1. The subject clearly stands out and the weapon is very visible against his shirt.
https://i53.photobucket.com/albums/g...VS14ag_6_3.jpg
GT14 Gen2SHP Image Intensifier
The Gen2 SHP tube performs well in this scenario because of the decent amount of light from the loading dock. The subject is visible, but the weapon is not immediately detected because of less resolution. A second glance will acquire the weapon. Overall, the image shows less-crisp lines and details than the Gen3 units.
https://i53.photobucket.com/albums/g...n/GT14_6_1.jpg
The built-in IR illuminator did not add much value to the image. It is a little lighter, but the practical application is marginal.
https://i53.photobucket.com/albums/g...n/GT14_6_2.jpg
The Surefire M1 provides more light for the unit and makes the subject stand out against the background. The weapon is more visible against the subject’s shirt.
https://i53.photobucket.com/albums/g...n/GT14_6_3.jpg
D300 Gen2+ MILSPEC Image Intensifier
The Gen2+ MILSPEC tube shows serious limitation in this scenario. The subject and foreground are completely silhouetted with no discernable detail. The subject can be acquired, but that is as far as the Gen2+ tube will go. It is impossible to see enough detail to identify the presence of a weapon, so the user has no idea of the threat level.
https://i53.photobucket.com/albums/g...n/D300_6_1.jpg
The built-in IR illuminator did not add any value to the image. It is negligibly lighter.
https://i53.photobucket.com/albums/g...n/D300_6_2.jpg
The additional higher-power illuminator is required for any useable image with the Gen2+ image intensifier. Even then, the limited capabilities of this tube produce a dark image. The subject is visible, along with the presence of a weapon. However, the image is too dark to detect any additional threats, limiting the user’s situational awareness.
https://i53.photobucket.com/albums/g...n/D300_6_3.jpg
ATN Viper Gen1+ Image Intensifier
The Gen1+ tube fails to deliver any useable image. The resolution is very poor and the image is completely back-lit, providing no detail of the subject. It is impossible to determine the threat level.
https://i53.photobucket.com/albums/g.../Viper_6_1.jpg
The built-in IR illuminator did not add any value to the image. It is negligibly lighter. Very faint detail can be seen in the image, but the weapon is still not detected.
https://i53.photobucket.com/albums/g.../Viper_6_2.jpg
The additional higher-power illuminator is required for any useable image with the Gen1+ tube. However, the lack of resolution is still so apparent, that it is difficult to acquire the weapon.
https://i53.photobucket.com/albums/g.../Viper_6_3.jpg
Thoughts-
This exercise illustrates a common scenario for law enforcement professionals. There was ample ambient light from the loading dock. As expected, the Gen3 units performed extremely well, providing high resolution images that immediately acquired the threat. The Gen2 SHP still performed well, though there was a noticed lower resolution. The Gen2+ and Gen1+ failed to produce any real useable information. The photos prove that they are borderline dangerous for professional use.
Test Scenario 7 – Parking Lot Search
This scenario was designed to test the equipment in a common patrol application, searching a parking lot for a hiding subject. Environmental lighting was minimal, as would be the case in an industrial parking area during non business hours.
ITT PVS-14 Night Enforcer Gen3 PINNACLE Auto-Gated Image Intensifier
The Gen3 PINNACLE Auto-Gated tube clearly acquires the subject behind the vehicle. The environment details are shown clearly. The subject is partially obscured and in shadow behind the vehicle. A weapon is partially visible in his hand.
https://i53.photobucket.com/albums/g...S14pin_7_1.jpg
The built-in IR illuminator did not add any value to the image. It is negligibly lighter.
https://i53.photobucket.com/albums/g...S14pin_7_2.jpg
The additional higher-power illuminator heavily brightens the image. The IR light reflects off the subject so much that he appears to glow. However, shadows are completely illuminated. The weapon clearly contrasts against the lighter shirt.
https://i53.photobucket.com/albums/g...S14pin_7_3.jpg
Litton PVS 14 Gen3 Auto-Gated Image Intensifier
As with the PINNACLE unit, the Litton Gen3 Auto-Gated tube clearly shows the scene with the subject behind the vehicle, holding a weapon.
https://i53.photobucket.com/albums/g...VS14ag_7_1.jpg
The built-in IR illuminator did not add any value to the image. It is negligibly lighter, with some IR reflection on the tail light.
https://i53.photobucket.com/albums/g...VS14ag_7_2.jpg
The additional higher-power illuminator heavily brightens the image. The IR light reflects off the subject so much that he appears to glow. However, shadows are completely illuminated. The weapon clearly contrasts against the lighter shirt.
https://i53.photobucket.com/albums/g...VS14ag_7_3.jpg
GT14 Gen2SHP Image Intensifier
The Gen2 SHP tube does a good job of displaying the image. There is less resolution than with the Gen3 units, but the image is still useable, clearly showing the subject behind the vehicle with a weapon.
https://i53.photobucket.com/albums/g...n/GT14_7_1.jpg
The built-in IR illuminator did not add any value to the image. It is negligibly lighter.
https://i53.photobucket.com/albums/g...n/GT14_7_2.jpg
The additional higher-power illuminator brightens the shadows, revealing the subject more. The weapon is clearly seen against the subject’s shirt.
https://i53.photobucket.com/albums/g...n/GT14_7_3.jpg
D300 Gen2+ MILSPEC Image Intensifier
The Gen2+ unit displays a very dark image. Details of the dark vehicle are indistinguishable. The light rims are easily seen. The subject is almost completely obscured behind the vehicle, making it almost impossible to acquire him.
https://i53.photobucket.com/albums/g...n/D300_7_1.jpg
The unit detects a reflection of IR light from the tail light when using the built-in illuminator. This inadvertently draws the user’s eye to that location where the subject is partially visible. The weapon is undetected.
https://i53.photobucket.com/albums/g...n/D300_7_2.jpg
The additional higher-power illuminator is required to observe the subject and see the presence of a weapon. Other details are still much obscured because of the relatively poor light-gathering abilities of the Gen2+ tube.
https://i53.photobucket.com/albums/g...n/D300_7_3.jpg
ATN Viper Gen1+ Image Intensifier
The Gen1+ unit produces no image without the addition of an IR light source. It is too weak to use the loading warehouse lights in the distance.
https://i53.photobucket.com/albums/g.../Viper_7_1.jpg
The built-in IR illuminator did not add any value to the image. All that can be seen is the reflection of IR light from the tail light, but it still does not produce enough light to see the subject.
https://i53.photobucket.com/albums/g.../Viper_7_2.jpg
The additional higher-power illuminator cannot help the Gen1+ tube much. It still does not have enough light to resolve an image. The subject is barely visible behind the vehicle, but there is not enough of an image to properly acquire him or identify a threat.
https://i53.photobucket.com/albums/g.../Viper_7_3.jpg
Thoughts-
Again, the Gen3 PINNACLE, Gen3 Auto-Gated, and Gen2 SHP performed well with the Gen2 SHP providing a darker, but still useable image. Searching a parking lot is a common scenario for law enforcement. The low-performing Gen2+ and Gen1+ units proved incapable of properly acquiring the subject and identifying the threat.
Test Scenario 8 – Loading Dock Search
This scenario was designed to simulate the search of a loading dock or truck yard for hidden subjects of devices. The environment was well-lit, which as you can see in the photos, actually works against all but the highest quality image intensifiers due to the high level of contrast created by the dark shadows under the vehicle. A quick search of the area might not detect the subject under the truck cab.
ITT PVS-14 Night Enforcer Gen3 PINNACLE Auto-Gated Image Intensifier
The scene is brightly lit from the loading dock lights. The truck is well-illuminated, but the light source creates heavy shadow under the cab. Even so, the Gen3 PINNACLE Auto-Gated tube detects something under the cab, just before the wheel. While the subject is not completely acquired, the mere detection offers more information and will alert the officer to a possible danger. The rest of the scene is well-lit with crisp detail, giving the officer good situational awareness.
https://i53.photobucket.com/albums/g...S14pin_8_1.jpg
The built-in IR illuminator does not add much to the scene, though it does slightly illuminate the area under the cab.
https://i53.photobucket.com/albums/g...S14pin_8_2.jpg
Using the additional IR illuminator, the subject is clearly seen lying under the cab. This is a tough scenario to acquire a threat, making it all the more dangerous. While a weapon cannot be identified, the officer will at least know someone is hiding under the vehicle. The highly sensitive Gen3 PINNACLE Auto-Gated tube has enough information to acquire the subject and identify his head and clothing.
https://i53.photobucket.com/albums/g...S14pin_8_3.jpg
Litton PVS 14 Gen3 Auto-Gated Image Intensifier
This scenario highlights the difference between the Standard Litton Gen3 Auto-Gated tube and the ITT Gen3 PINNACLE Auto-Gated tube. The Gen3 Litton Auto-Gated unit is not as capable of providing as bright an image as the PINNACLE unit. The image appears to have more contrast because the shadow areas are darker. This can lessen situational awareness, but overall, the image is good and a clear view of the area is achieved. However, the main detriment in this scene is the heavy shadowing under the truck. The prone subject is completely in shadow. Unlike the PINNACLE unit where something could at least be identified under the cab, the Litton Gen3 Auto-Gated unit produces no warning of a possible danger due to its inability to gather as much light as the PINNACLE unit.
https://i53.photobucket.com/albums/g...VS14ag_8_1.jpg
The built-in IR illuminator did not add any value to the image. It is negligibly lighter. The subject beneath the cab is still invisible.
https://i53.photobucket.com/albums/g...VS14ag_8_2.jpg
The additional higher-power illuminator begins to make the subject visible beneath the cab. However, the level of brightness seen here, with the Surefire M1 is almost the same as the naked image through the PINNACLE unit. But, at least the subject is visible to the officer and appropriate action can be taken.
https://i53.photobucket.com/albums/g...VS14ag_8_3.jpg
GT14 Gen2SHP Image Intensifier
With the amount of available ambient light, the Gen2 SHP tube performs very similar to the Gen3 Auto-Gated unit. It produces an arguably lighter image. The main difference is the resolution and edge-to-edge clarity. While the image is bright, providing good situational awareness, the edges and definition of objects are noticeably fuzzier than the Gen3 units. The subject under the cab is barely visible, but the image is bright enough that something can be detected.
https://i53.photobucket.com/albums/g...n/GT14_8_1.jpg
The built-in IR illuminator did not add any value to the image. It is negligibly lighter.
https://i53.photobucket.com/albums/g...n/GT14_8_2.jpg
The additional higher-power illuminator makes the subject more visible under the cab. In this case, it is safe to say the separate IR illuminator is required for acquiring the subject.
https://i53.photobucket.com/albums/g...n/GT14_8_3.jpg
D300 Gen2+ MILSPEC Image Intensifier
The Gen2+ tube produces an image that can identify the truck, dumpsters, and rear loading dock. Details are dark and resolution is relatively poor. The bright lights of the loading dock greatly help the image. The subject under the cab cannot be seen.
https://i53.photobucket.com/albums/g...n/D300_8_1.jpg
The built-in IR illuminator did not add any value to the image.
https://i53.photobucket.com/albums/g...n/D300_8_2.jpg
Even with the separate IR illuminator, the subject under the truck is not visible. The area is brightened slightly, but the Gen2+ tube cannot process enough light to acquire the subject in the heavy shadows.
https://i53.photobucket.com/albums/g...n/D300_8_3.jpg
ATN Viper Gen1+ Image Intensifier
The Gen1 tube produces an overly-bright image due to the heavy blooming from loading dock lights. The Gen1+ tube cannot deal with these lights and creates an awkward, fish-eye image at this distance. Situational awareness is severely hampered by the blooming, causing the extreme halos and distortion. The shadow under the truck is still concealing the subject.
https://i53.photobucket.com/albums/g.../Viper_8_1.jpg
The built-in IR illuminator did not add any value to the image.
https://i53.photobucket.com/albums/g.../Viper_8_2.jpg
The additional higher-power illuminator does not add any useable information to the image due to the heavy halo blooming created by the loading dock lights. The subject is still hidden from view.
https://i53.photobucket.com/albums/g.../Viper_8_3.jpg
Thoughts-
This evolution brings to light the advantage of the Gen3 PINNACLE Auto-Gated tube. Its ability to gather and process more light is exemplified by its detection of the subject under the truck cab, even without the aid of an IR illuminator. This is a key factor because bad guys like to hide in shadows. An officer’s night vision device needs to be able to detect the subject in these extreme dark conditions. Also of note is the ability of the Gen3 and Gen2 SHP units to deal with halo and bloom. This scenario has the viewer looking directly into light sources. As illustrated with the Gen2+ and Gen1+, the light sources create a blooming effect. This is especially noticed in the Gen1 unit which has no provision for dealing with this condition and creates a heavily distorted (almost dangerous) image.
Test Scenario 9 – Close Range Surprise Encounter
This scenario was developed to determine the ability of the user to determine the threat level of a subject encountered by surprise in an environment with very little ambient lighting. It is important for an officer to quickly determine if a threat exists and needs to be engaged with deadly force. Mistaken identity shootings occur too often when an officer believes a subject is armed and it turns out they had something else in their hand. This scenario has the officer walking around a corner and being confronted by an individual.
ITT PVS-14 Night Enforcer Gen3 PINNACLE Auto-Gated Image Intensifier
The first photo shows the subject holding a cell phone in his right hand. It is readily identifiable and would be a no-shoot situation. The second photo shows the same subject with a pistol in his hand. This is also easily identified. The bright images show all details.
https://i53.photobucket.com/albums/g...S14pin_9_1.jpg
https://i53.photobucket.com/albums/g...S14pin_9_2.jpg
At close range, the built-in IR illuminator flattens some of the background foliage. The subject is clearly identified. The only real difference is that the subject’s eyes are reflecting the IR light. Both the cell phone and gun are easily identified.
https://i53.photobucket.com/albums/g...S14pin_9_3.jpg
https://i53.photobucket.com/albums/g...S14pin_9_4.jpg
The Surefire M1 is almost too bright for this application. The heavy illumination bounces of the subject’s clothing, eliminating details of his shirt. The subject’s facial features are easily recognized along with the cell phone and pistol. Note how the IR light tends to focus on the subject and the background foliage goes dark. At this distance, the illuminator actually somewhat hampers the user’s situational awareness.
https://i53.photobucket.com/albums/g...S14pin_9_5.jpg
https://i53.photobucket.com/albums/g...S14pin_9_6.jpg
Litton PVS 14 Gen3 Auto-Gated Image Intensifier
As with the PINNACLE unit, the Litton Gen3 Auto-Gated tube clearly shows the subject and identifies the cell phone of the pistol. The image is slightly darker than the PINNACLE unit, but still readily useable.
https://i53.photobucket.com/albums/g...VS14ag_9_1.jpg
https://i53.photobucket.com/albums/g...VS14ag_9_2.jpg
Again, the built-in IR illuminator does little more than flatten some of the contrast in the images. The subject’s eyes reflect the IR light. The objects in his hands are easily identified.
https://i53.photobucket.com/albums/g...VS14ag_9_3.jpg
https://i53.photobucket.com/albums/g...VS14ag_9_4.jpg
The Surefire M1 focuses the IR light on the subject, creating a hot spot on the torso. The image is not as bright as the PINNACLE, which causes a little less recognition of the hands. The cell phone is harder to read compared to the pistol.
https://i53.photobucket.com/albums/g...VS14ag_9_5.jpg
https://i53.photobucket.com/albums/g...VS14ag_9_6.jpg
GT14 Gen2SHP Image Intensifier
The subject can be clearly acquired. However, the lower resolution causes the cell phone or pistol to be identified by shape rather than detail. That said, the gun is still easily resolved and a quick shoot/no-shoot determination can be made.
https://i53.photobucket.com/albums/g...n/GT14_9_1.jpg
https://i53.photobucket.com/albums/g...n/GT14_9_2.jpg
The built-in IR illuminator did not add any value to the image.
https://i53.photobucket.com/albums/g...n/GT14_9_3.jpg
https://i53.photobucket.com/albums/g...n/GT14_9_4.jpg
The Surefire M1 blooms considerably at this range. The surrounding details begin to fade, but the subject’s hands are still quite visible. The loss of resolution in the Gen2 SHP tube begins to show.
https://i53.photobucket.com/albums/g...n/GT14_9_5.jpg
https://i53.photobucket.com/albums/g...n/GT14_9_6.jpg
D300 Gen2+ MILSPEC Image Intensifier
The Gen2+ tube really struggles with the lack of ambient light. The silhouette of the subject can be made out against the lighter background, but details are not available because of the Gen2+ tube’s poor light gathering ability. The subject is obviously holding something in his right hand, but the object cannot be resolved. This situation could result in catastrophe because rapid shoot/no-shoot response cannot be made.
https://i53.photobucket.com/albums/g...n/D300_9_1.jpg
https://i53.photobucket.com/albums/g...n/D300_9_2.jpg
The built-in IR illuminator aids in creating detail in the subject’s face and shirt because they are lighter color and soak up most of the light. The subject’s hands and the surrounding area are almost completely blacked out. Again, this creates danger because the presence of a threat is not immediately identified.
https://i53.photobucket.com/albums/g...n/D300_9_3.jpg
https://i53.photobucket.com/albums/g...n/D300_9_4.jpg
The additional higher-power illuminator provides more definition to the subject. While the IR light seemed to wash out the subject in the other devices, the Gen2+ tube cannot gather nearly as much light. The low resolution makes features appear fuzzy. The Gen2+ tube can only focus on the exact area of IR illumination, so the hands fall off the image. Even with the Surefire M1, the presence of a threat cannot be determined.
https://i53.photobucket.com/albums/g...n/D300_9_5.jpg
https://i53.photobucket.com/albums/g...n/D300_9_6.jpg
ATN Viper Gen1+ Image Intensifier
The Gen1+ unit does not have enough light to create any image. The subject and surrounding environment cannot be seen.
https://i53.photobucket.com/albums/g.../Viper_9_1.jpg
https://i53.photobucket.com/albums/g.../Viper_9_2.jpg
The built-in IR illuminator did not add any value to the image.
https://i53.photobucket.com/albums/g.../Viper_9_3.jpg
https://i53.photobucket.com/albums/g.../Viper_9_4.jpg
The additional higher-power illuminator at least allows the subject to be seen through the Gen1+ device. Resolution is poor and facial features are somewhat obscured. The subject’s hands cannot be seen, so it is unknown whether or not a threat exists.
https://i53.photobucket.com/albums/g.../Viper_9_5.jpg
https://i53.photobucket.com/albums/g.../Viper_9_6.jpg
Conclusions
Based on the test data documented above, it is the authors’ professional recommendation that only Gen3 night vision, such as the ITT PVS-14 Gen3 PINNACLE Auto-Gated Night Enforcer or the Litton Gen3 Auto-Gated PVS-14) be utilized for domestic law enforcement and homeland security taskings.
This conclusion is based on the need for responders to be able to identify threats rapidly in reasonable circumstances, with a high degree of probable accuracy. Data clearly illustrates the short-comings of the Gen1 and Gen2 image intensifier tubes. While sufficient for hobbyist application, LE work requires a much higher level of performance. The lack of brightness and resolution found in the Gen1 and Gen2 tubes isolates the operator from his surroundings. Situational awareness is severely compromised. As seen in the photos, the lower-end tubes produce very dark images that keep the user from seeing the environment. They had a hard time identifying the subject, let alone any other possible threats. With today’s advances in night vision technology, there is no reason for a professional to settle for lesser performance.
IR illuminators should be taken into account when reviewing the images. In some instances, an IR illuminator was absolutely required for the night vision device to resolve an image. Today, criminals are acquiring night vision as well. While IR illuminators are able to drastically improve the image, anyone else looking through night vision sees them too. So, a constantly active IR illuminator is akin to a big bullseye on the officer’s head to anyone else observing them through night vision. Suffice to say an image intensifier that requires an active IR illuminator to produce a useable image should be avoided.
Night vision devices are not magic. They greatly enhance the operational capabilities of the modern law enforcement professional, but they have limitations. As seen in the first scenario (residential basement with no ambient light), even the latest generation image intensifier was rendered practically useless without artificial infrared light. Once the illuminator was activated, the Gen3 devices produced obviously superior images. But, the illuminator was required in that environment. Professionals need to constantly train with their night vision devices to maintain proficiency and be aware of their limitations.
The images presented here do a good job of illustrating the capabilities of the various devices. However, it should be noted that photographic representation of night vision images is never completely accurate and always reproduces a slightly degraded quality. While these images are close, the operator’s view will always be better.
Another subject worth mentioning is the quality of the optic being purchased. Regardless of the tube’s capabilities, the system still has to function. We should note the ATN Viper’s built-in IR illuminator did not work out of the box. It is evidenced by the photos, that a Gen1 tube requires an IR illuminator to provide any kind of useable image. The built-in illuminator required us to turn on and off the system several times before it would function. After that, it would only work intermittently.
Night vision represents a critical component of an officer’s ability to meet and engage today’s threats. Law Enforcement officers, departments, units, and agencies need to be well aware of the technology’s capabilities and limitations when employing night vision in a social setting. They also need to be well aware of the various levels of technology available when making purchase decisions.
